Building Code and Building Construction - Questions and Answers
Or when you want to know how construction is supposed to be done.

|
AskCodeMan.com
|
The following Codemen are available to answer your questions:
All Codes and Standards - Jerry Peck, Codeman


Q&A Board links
  • REGISTER

  • FAQ

  • LOGIN

  • Q&A BOARD INDEX

  • View New Questions

  • View Unanswered Questions

  • View Active Questions/Answers

  • Mark Questions as read

  • View Your Questions

  • Go To Your User Control Panel




  • Links to:
  • Construction Litigation Consultants


  • Florida Building Commission

  • Florida Building Codes Online


  • International Code Council

  • ICC Codes Free Online


  • Building Officials and Administrators of Florida




  • Product Approvals
  • Florida Product Approval

  • ICC Evaluation Reports Search

  • Miami-Dade NOA Search




  • Inspector and Contractor License Search
  • Search Florida Licenses




  • Technical links
  • Technical Information page


























































  • Contact Codeman



  • Custom Search

    Concrete support columns

    Concrete support columns

    New postby phil327 on Fri Apr 25, 2014 2:41 am

    We are doing concrete restoration here in Southern Florida. Our Condo has a covered carport for the owners. The structure is a simple 4 inch thick concrete roof supported by 12 inch diameter concrete columns with rebar. A number of the columns have damage and the company doing the restoration work has removed 1/2 of the diameter of the column due to concrete problems. They have added temporary support columns while they are doing the work. This is not the entire length of the column but 2-3 feet above ground. They have a a number of BASF N-425 premixed mortar bags on site. Is this the correct material for the columns? I ask because BASF calls this a lightweight material. thank you
    phil327
     
    Posts: 42
    Joined: Wed Jun 26, 2013 7:58 pm

    Re: Concrete support columns

    New postby Jerry Peck - Codeman on Fri Apr 25, 2014 7:32 am

    It appears to be not quite as strong as the gunite used for many repairs of that type. You can compare compressive strength (probably the main one for your columns) and other strength/elasticity/etc factors.

    BASF N-425:
    - http://www.buildingsystems.basf.com/p02 ... 25-tds.pdf

    Gunite:
    - http://www.buildsite.com/pdf/fivestarpr ... 630310.pdf
    - (there are various strength mixtures gunite, above is just one of them)

    You would need to go with what they are supplying at this time due to not having followed through on inspections of the project as it has progressed. If you make any changes to the specified product then you, not the engineer, becomes responsible for whether it works or not.
    Jerry Peck - CodeMan
    AskCodeMan.com

    Construction and Litigation Consultant
    Construction Litigation Consultants, LLC.
    ConstructionLitigationConsultants.com
    User avatar
    Jerry Peck - Codeman
    Site Admin
     
    Posts: 1103
    Joined: Fri Dec 12, 2008 12:06 pm


    Return to Structure: Footings, foundation walls, floor framing, wall framing, ceiling framing, roof framing (rafters & engineered trusses)



    Who is online

    Users browsing this forum: No registered users and 1 guest



    www.AskCodeMan.com
    cron