Building Code and Building Construction - Questions and Answers
Or when you want to know how construction is supposed to be done.

|
AskCodeMan.com
|
The following Codemen are available to answer your questions:
All Codes and Standards - Jerry Peck, Codeman


Q&A Board links
  • REGISTER

  • FAQ

  • LOGIN

  • Q&A BOARD INDEX

  • View New Questions

  • View Unanswered Questions

  • View Active Questions/Answers

  • Mark Questions as read

  • View Your Questions

  • Go To Your User Control Panel




  • Links to:
  • Construction Litigation Consultants


  • Florida Building Commission

  • Florida Building Codes Online


  • International Code Council

  • ICC Codes Free Online


  • Building Officials and Administrators of Florida




  • Product Approvals
  • Florida Product Approval

  • ICC Evaluation Reports Search

  • Miami-Dade NOA Search




  • Inspector and Contractor License Search
  • Search Florida Licenses




  • Technical links
  • Technical Information page


























































  • Contact Codeman



  • Custom Search

    2 wire ungrounded circuit labeling

    2 wire ungrounded circuit labeling

    New postby bbkaptin on Thu May 19, 2016 2:08 pm

    Why is the "GFCI protected" "No equipment Ground" label required on GFCI recepticle protecting a 2 wire ungrounded circuit. Just curious.
    bbkaptin
     
    Posts: 1
    Joined: Wed Jul 16, 2014 1:49 pm

    Re: 2 wire ungrounded circuit labeling

    New postby Jerry Peck - Codeman on Thu May 19, 2016 6:18 pm

    Those labels are for grounding-type receptacles installed in place of nongrounding-type receptacles because when someone goes to use the grounding-type receptacle they will assume that it is grounded ... after all ... the grounding-type receptacle does have a a hole for a grounding plug's grounding prong to go into ...

    ... but there is no ground present, it is an ungrounded two-wire system.

    The main label is the label which states "No equipment ground" as that warns you that the receptacle is not really very safe to use as there is no ground to that receptacle - i.e. if the appliance you are plugging in and using has a ground-fault ... you could be electrocuted (die).

    The label "GFCI Protected" is there to let you know that it has GFCI protection and GFCI protection is a safety feature and helps prevent shocks and electrocution by tripping off ... provided the GFCI protection is working, so there still is some risk.

    However, if someone cuts the ground off a grounding-type receptacle (or it comes loose or breaks off) ... you are subject to the same electrical shock and electrocution risks of a nongrounding-type receptacle ... and that risk is always present because no one checks to verify that a ground is actually connected to a receptacle before they use it - in theory, though, there will likely be a ground to the grounding-type receptacle ... unlike an nongrounding-type receptacle.
    Jerry Peck - CodeMan
    AskCodeMan.com

    Construction and Litigation Consultant
    Construction Litigation Consultants, LLC.
    ConstructionLitigationConsultants.com
    User avatar
    Jerry Peck - Codeman
    Site Admin
     
    Posts: 1093
    Joined: Fri Dec 12, 2008 12:06 pm


    Return to Electrical: Service Equipment, electrical panels, wiring, lighting, switches, receptacles, etc.



    Who is online

    Users browsing this forum: No registered users and 1 guest



    www.AskCodeMan.com
    cron