Building Code and Building Construction - Questions and Answers
Or when you want to know how construction is supposed to be done.

|
AskCodeMan.com
|
The following Codemen are available to answer your questions:
All Codes and Standards - Jerry Peck, Codeman


Q&A Board links
  • REGISTER

  • FAQ

  • LOGIN

  • Q&A BOARD INDEX

  • View New Questions

  • View Unanswered Questions

  • View Active Questions/Answers

  • Mark Questions as read

  • View Your Questions

  • Go To Your User Control Panel




  • Links to:
  • Construction Litigation Consultants


  • Florida Building Commission

  • Florida Building Codes Online


  • International Code Council

  • ICC Codes Free Online


  • Building Officials and Administrators of Florida




  • Product Approvals
  • Florida Product Approval

  • ICC Evaluation Reports Search

  • Miami-Dade NOA Search




  • Inspector and Contractor License Search
  • Search Florida Licenses




  • Technical links
  • Technical Information page


























































  • Contact Codeman



  • Custom Search

    Smoke detector placement

    Smoke detector placement

    New postby Dave F on Tue Mar 20, 2018 10:00 am

    Hello,
    I'm adding a bathroom to my house, and the project is almost complete, all inspections have gone well. I'm preparing for the final inspection, and one thing I have to do is add a lot of smoke and CO detectors around the home. I've been told by the inspectors on previous inspections, in what rooms and how many and what types to install. A friend of mine in the same state as me did some renovations at his home, and also needed to add smoke detectors, he said during the inspection that the actual placement of the detector in the room was defined. For example, in a bedroom, the detector had to be a certain distance from the door and the wall, etc. I've looked at the code, and I can't see a description of exactly where to place a detector in a given room, or at least a description of a place that would be unacceptable. I'm almost at the point where I will be installing these devices, and I just wanted to check and see if there was a way to install a smoke detector in a bedroom (or anywhere else) "wrong".

    Thanks,

    Dave Fenoff
    Dave F
     
    Posts: 11
    Joined: Wed Feb 10, 2016 12:15 pm

    Re: Smoke detector placement

    New postby Jerry Peck - Codeman on Tue Mar 20, 2018 12:32 pm

    The code tells which rooms and areas require smoke alarms and CO alarms (they are "alarms" because they not only gave "detectors" on them, they also contain "alarms" to warn you what the :detectors" found).

    The code also says where not to install them (not inside or outside bathrooms, not in kitchens), but the Fire codes (and many different Fire codes are adopted around the country) will typically state where smoke alarms and CO alarms should and should not be installed - such as on a ceiling within 6" of a wall, not on a wall within 6" of the ceiling, not within 3' of a peaked ceiling, not within 3' of air disturbing sources such as ceiling fan blades ac and heat supplies, etc (those are from memory, but are representative of where "not" to install them).

    The best way to get the answer you need is to buy one of the smoke alarms you will be buying, that will contain the manufacturer's installation instructions, and those will tell you where to, and where not to, install the alarms.

    Install the alarms where stated, and if there is a question about the location with an inspector, show the inspector the installation instructions and that you followed those.
    Jerry Peck - CodeMan
    AskCodeMan.com

    Construction and Litigation Consultant
    Construction Litigation Consultants, LLC.
    ConstructionLitigationConsultants.com
    User avatar
    Jerry Peck - Codeman
    Site Admin
     
    Posts: 1103
    Joined: Fri Dec 12, 2008 12:06 pm


    Return to Electrical: Service Equipment, electrical panels, wiring, lighting, switches, receptacles, etc.



    Who is online

    Users browsing this forum: No registered users and 1 guest



    www.AskCodeMan.com