Building Code and Building Construction - Questions and Answers
Or when you want to know how construction is supposed to be done.

|
AskCodeMan.com
|
The following Codemen are available to answer your questions:
All Codes and Standards - Jerry Peck, Codeman


Q&A Board links
  • REGISTER

  • FAQ

  • LOGIN

  • Q&A BOARD INDEX

  • View New Questions

  • View Unanswered Questions

  • View Active Questions/Answers

  • Mark Questions as read

  • View Your Questions

  • Go To Your User Control Panel




  • Links to:
  • Construction Litigation Consultants


  • Florida Building Commission

  • Florida Building Codes Online


  • International Code Council

  • ICC Codes Free Online


  • Building Officials and Administrators of Florida




  • Product Approvals
  • Florida Product Approval

  • ICC Evaluation Reports Search

  • Miami-Dade NOA Search




  • Inspector and Contractor License Search
  • Search Florida Licenses




  • Technical links
  • Technical Information page


























































  • Contact Codeman



  • Custom Search

    Minimum ceiling height

    Minimum ceiling height

    New postby mmarcley on Sat Dec 05, 2009 3:13 pm

    What is the minimum ceiling height for a bedroom in Wilmington, NC? It is a finished room above a garage and the current finished height is 7"2", but it has no closet and the plans call it "storage." I am going to dormer the room, but cannot easily get more than the 7'2" for half the room.
    mmarcley
     
    Posts: 3
    Joined: Sat Dec 05, 2009 2:06 pm

    Re: Minimum ceiling height

    New postby Jerry Peck - Codeman on Sat Dec 05, 2009 4:24 pm

    Hi Mark,

    The minimum ceiling height in the North Carolina Residential Code, which is based on the International Residential Code, is: (underlining and bold are mine)
    - SECTION R305 CEILING HEIGHT
    - - R305.1 Minimum height.
    - - - Habitable rooms, hallways, corridors, bathrooms, toilet rooms, laundry rooms and basements shall have a ceiling height of not less than 7 feet (2134 mm). The required height shall be measured from the finish floor to the lowest projection from the ceiling.
    - - - - Exceptions:
    - - - - - 1. Beams and girders spaced not less than 4 feet (1219 mm) on center may project not more than 6 inches (152 mm) below the required ceiling height.
    - - - - - 2. Ceilings in basements without habitable spaces may project to within 6 feet, 8 inches (2032 mm) of the finish floor; and beams, girders, ducts or other obstructions may project to within 6 feet, 4 inches (1931 mm) of the finished floor.
    - - - - - 3. Not more than 50 percent of the required floor area of a room or space is permitted to have a sloped ceiling less than 7 feet (2134 mm) in height with no portion of the required floor area less than 5 feet (1524 mm) in height.

    Your description of having 7 feet 2 inches available sounds like you will not have any problems in meeting the minimum ceiling height, but you will not have a lot of room to spare either.

    A large room will feel cramped with only a 7 foot ceiling.
    Jerry Peck - CodeMan
    AskCodeMan.com

    Construction and Litigation Consultant
    Construction Litigation Consultants, LLC.
    ConstructionLitigationConsultants.com
    User avatar
    Jerry Peck - Codeman
    Site Admin
     
    Posts: 1103
    Joined: Fri Dec 12, 2008 12:06 pm


    Return to Interior Environment: Light, ventilation, ceiling height, etc.



    Who is online

    Users browsing this forum: No registered users and 1 guest



    www.AskCodeMan.com
    cron