AskCodeMan
When you have questions regarding construction and building codes, inspections, or you simply want to know how construction is supposed to be done ... you have come to the right place.
Custom Search
oil venting
First unread post • 2 posts • Page 1 of 1
oil venting
by dog hare on Tue Sep 28, 2010 11:23 pm
I'm installing a Toyotomi OM-180 water heater in Michigan. Being rated at 148,000 btu am I correct that the direct vent needs to be 4' from any opening window or door? I see a lot of questions about smaller btu appliances but nothing this size. Thanks, Tim
- dog hare
- Posts: 1
- Joined: Tue Sep 28, 2010 11:14 pm
Re: oil venting
by Jerry Peck - Codeman on Tue Sep 28, 2010 11:31 pm
Hi Tim,
The clearance all depend specifically on what is stated in the installation instructions for your appliance.
If you do not have the installation instructions contact the manufacturer and have then send you the installation instructions. Many installation instructions are available by searching the internet.
Sorry that I could not give you the answer as you were asking, but it really does specifically depend on the installation instructions.
The clearance all depend specifically on what is stated in the installation instructions for your appliance.
If you do not have the installation instructions contact the manufacturer and have then send you the installation instructions. Many installation instructions are available by searching the internet.
Sorry that I could not give you the answer as you were asking, but it really does specifically depend on the installation instructions.
Jerry Peck - CodeMan
AskCodeMan.com
Construction Litigation Consultant - Retired
Construction and Code Consultant - Semi Retired
AskCodeMan.com
Construction Litigation Consultant - Retired
Construction and Code Consultant - Semi Retired
-
Jerry Peck - Codeman - Site Admin
- Posts: 1199
- Joined: Fri Dec 12, 2008 12:06 pm
2 posts • Page 1 of 1
Who is online
Users browsing this forum: No registered users and 3 guests