Building Code and Building Construction - Questions and Answers
Or when you want to know how construction is supposed to be done.

|
AskCodeMan.com
|

Custom Search

oil venting

oil venting

New postby dog hare on Tue Sep 28, 2010 11:23 pm

I'm installing a Toyotomi OM-180 water heater in Michigan. Being rated at 148,000 btu am I correct that the direct vent needs to be 4' from any opening window or door? I see a lot of questions about smaller btu appliances but nothing this size. Thanks, Tim
dog hare
 
Posts: 1
Joined: Tue Sep 28, 2010 11:14 pm

Re: oil venting

New postby Jerry Peck - Codeman on Tue Sep 28, 2010 11:31 pm

Hi Tim,

The clearance all depend specifically on what is stated in the installation instructions for your appliance.

If you do not have the installation instructions contact the manufacturer and have then send you the installation instructions. Many installation instructions are available by searching the internet.

Sorry that I could not give you the answer as you were asking, but it really does specifically depend on the installation instructions.
Jerry Peck - CodeMan
AskCodeMan.com
Construction Litigation Consultant - Retired
Construction and Code Consultant - Semi Retired
User avatar
Jerry Peck - Codeman
Site Admin
 
Posts: 1187
Joined: Fri Dec 12, 2008 12:06 pm


Return to Fuel Gas: Gas appliances (except Fireplaces, see Fireplaces), gas furnaces, fuel oil appliances, combustion air



Who is online

Users browsing this forum: No registered users and 1 guest


www.AskCodeMan.com