Building Code and Building Construction - Questions and Answers
Or when you want to know how construction is supposed to be done.

|
AskCodeMan.com
|

Custom Search

Holes in Sheer paneling

Holes in Sheer paneling

New postby Marc M on Sun May 01, 2011 11:41 pm

Jerry,
are there any acceptable size holes allowed in sheer paneling?
Marc M
 
Posts: 173
Joined: Sat May 09, 2009 10:24 am

Re: Holes in Sheer paneling

New postby Jerry Peck - Codeman on Mon May 02, 2011 5:58 pm

Hi Marc,

The general, basic, answer is 'no, no openings in shear walls', the more expanded and specific answer would be 'depends on the engineering'.

From the IBC:
- 2305.1.3 Openings in shear panels. Openings in shear panels that materially affect their strength shall be fully detailed on the plans, and shall have their edges adequately reinforced to transfer all shearing stresses.

The key becomes "Openings in shear panels that materially affect their strength" - and that is where the engineer comes in.

I would place it in the same category as openings through I-Joist - only allowed as allowed for on the engineering. A recent I-Joist installation I inspected was allowed to have holes, but the holes had to be spaced at least 2 times the diameter of the larger hole from any other hole (among other limitations on size and location).
Jerry Peck - CodeMan
AskCodeMan.com
Construction Litigation Consultant - Retired
Construction and Code Consultant - Semi Retired
User avatar
Jerry Peck - Codeman
Site Admin
 
Posts: 1199
Joined: Fri Dec 12, 2008 12:06 pm

Re: Holes in Sheer paneling

New postby Marc M on Mon May 02, 2011 11:52 pm

I thought I saw before but didnt remember where. Thank you so much.
Marc M
 
Posts: 173
Joined: Sat May 09, 2009 10:24 am


Return to Structure: Footings, foundation walls, floor framing, wall framing, ceiling framing, roof framing (rafters & engineered trusses)



Who is online

Users browsing this forum: No registered users and 0 guests


cron