by Jerry Peck - Codeman on Sun Jun 20, 2010 9:01 pm
Hi Stu,
There are different references at various sections in the IRC, but this would be the overall applicable reference when no other more specific reference is stated, and this is pretty specific in and of itself:
From the 2006 IRC.
- R102.1 General. Where, in any specific case, different sections of this code specify different materials, methods of construction or other requirements, the most restrictive shall govern. Where there is a conflict between a general requirement and a specific requirement, the specific requirement shall be applicable.
"The code" has the "general" requirements, "the manufacturers' installation instructions" are the "specific requirements", thus, the code is subservient to the manufacturer's installation instructions, EXCEPT when the code is more restrictive as "the most restrictive shall govern".
Sometimes, it may get confusing because it states "Where there is a conflict between a general requirement and a specific requirement, the specific requirement shall be applicable.", which would indicate that the specific requirement would take precedence, however, before it states that, this is stated "the most restrictive shall govern". That means the most restrictive shall govern ... regardless whether it is in the general requirements or the specific requirements. Following that is that the specific requirements shall be applicable if they are as, or more, restrictive than the general requirements.
I realize I stated the same thing several ways, but that is a result of having had discussions on this issue with various contractors with the end result being that the specific requirements rules ... unless it is less restrictive than the general requirements. Whew!
Do you feel like we just danced around the mulberry bush too?
Jerry Peck - CodeMan
AskCodeMan.com
Construction Litigation Consultant - Retired
Construction and Code Consultant - Semi Retired